|
| |
Carpentry II
 |
Carpentry IIA
 | 27202-01 Reading Plans and Elevations |
| 27202-01 Site Layout I |
| 27203-01 Introduction to Concrete
Describes the properties, characteristics, and uses of various types of
cement, aggregates, and other materials that, when mixed together, form
different types of concrete. Procedures for concrete volume estimates and
testing of freshly mixed concrete are covered, along with methods and
materials for curing concrete. Reinforcement materials used in concrete,
such as reinforcement bars, bar supports, and welded-wire fabric are
described and defined. |
| 27204-01 Foundations and Flatwork
Covers the construction of forms for continuous, stepped continuous, pier,
and grade beam concrete footings. Also covered are edge forms used for
on-grade concrete slabs and similar structures. Forming terms, parts of
forms, and the procedures for constructing basic footing and edge forms are
included. |
|
|
Carpentry IIB
| 27204-01 Foundations and Flatwork
Covers the construction of forms for continuous, stepped continuous, pier,
and grade beam concrete footings. Also covered are edge forms used for
on-grade concrete slabs and similar structures. Forming terms, parts of
forms, and the procedures for constructing basic footing and edge forms are
included. |
| 27205-01 Concrete Forms
Covers the applications and construction methods for various types of
job-built forms, including wall, column, slab-and-beam, and stair forms.
Instructor’s Guide includes instruction sheets for construction of various
forms. |
| 27206-01 Reinforcing Concrete
Explains the selection and uses of different types of reinforcing materials.
Describes general requirements for cutting, bending, splicing, and tying
reinforcing steel, as well as placement of
the steel in various types of footings, columns, walls, and slabs. |
|
|
Carpentry IIC
| 27207-01 Handling and Placing Concrete
Covers the tools, equipment, and procedures required for handling,
placement, and finishing of concrete at the job site. Also covered is
general information about joints made in concrete structures, the use of
joint sealants, and form removal procedures. Safety procedures for handling,
placing, and finishing concrete are emphasized. |
| 27208-01 Manufactured Forms
Covers the types of manufactured forms and form hardware systems used in the
construction of walls, columns, deck and roof slabs, beams and
girders, culverts, and highways. Includes coverage of flying forms,
slipforms, shoring, and architectural finishes. |
|
|
